Page 11
Figure 3: Front View RYMASKON 200 change set point or device setting in EDIT-mode directly access a set point in DISPLAY-mode no specific function, the button state can be requested to control lighting no specific function, the button state can be requested to set occupancy state short press <3s: cycle through display values, set points or device settings...
Page 13
Display values are shown. Set points are shown. Set points can be edited. Device settings can be edited. This mode is only accessible for the system admi-nistrator. Offset values can be edited The pincode for the end user has to be entered to show and/or edit the requested value.
Page 16
Internal Temperature Relative Humidity Dew Point External Temperature Internal Temperature Set Point Fan Stage Table 6: Factory Default for RYMASKON 200...
Page 51
Figure 9: Apple Remote Control Table 39: Apple Remote Button Codes...
Page 54
maximum power 10,4 11,2 12,0 12,8 consumption of devices for 0,5mm² 1.620 max. Cable length for 1,0mm² 3.250 1.620 1.080 max. Power loss on cable Table 40: Cable Length and Power Loss on Cable...