S+S Regeltechnik Rymaskon 600 Operating Instructions Manual page 41

Operating instructions
RYMASKON ® 600 - BACnet
RYMASKON 600 Series | Parameter Table | Last Updated: 23/03/2022 (EN)
RYMASKON ® 600 - Modbus
FAN, BOOST, LIGHTS AND BLINDS
Parameter name
Enable Function 1
Enable Function 2
Blind 1 Mode
Blind 1 Configuration
Blind 2 Mode
Blind 2 Configuration
Light Mode
Light Off Delay
S+S REGELTECHNIK GMBH | THURN-UND -TA XIS - STR. 22 | D -90411 NÜRNBERG | GERMANY | FON +49 ( 0 ) 911 51947- 0 | w w w.S p lusS.de
Description
Releases the icon for blind 1.
NOTE: If blind 1 has been selected, Blind 1 Mode
must be adjusted/checked at the same time.
Releases the icon for lights or blind 2.
NOTE: If blind 2 has been selected, Blind 2 Mode
must be adjusted/checked at the same time.
Sets the blind 1 increments when actuating the arrow keys
on the screen.
(1) On/Off: 0, 100%
(2) 4 steps: 0, 25, 50, 75, 100%
(3) 10 steps: 0, 10, 20, ..., 100%
(4) infinite: 0, 1, 2, 3, ..., 100%
Parameter 4 enables an automatic function
automatically modifying the value
if the key is pressed for a long time.
(see chapter "Blind control")
Releases the graphical display of the movement type of
blind 2 and the relevant variables for manual control.
(0) Level: translatory movement, UP/DOWN
(1) Tilt: rotating movement, rotation
(2) Level + Tilt
(see chapter "Blind control")
Sets the blind 1 increments when actuating the arrow keys
on the screen.
(1) On/Off: 0, 100%
(2) 4 steps: 0, 25, 50, 75, 100%
(3) 10 steps: 0, 10, 20, ..., 100%
(4) infinite: 0, 1, 2, 3, ..., 100%
Parameter 4 enables an automatic function
automatically modifying the value
if the key is pressed for a long time.
(see chapter "Blind control")
Releases the graphical display of the movement type of
blind 2 and the relevant variables for manual control.
(0) Level: translatory movement, UP/DOWN
(1) Tilt: rotating movement, rotation
(2) Level + tilt
(see chapter "Blind control")
Sets the light intensity increments when actuating the
lights icon on the main screen.
(1) 0-1: 0, 100%
(2) 0-1-2: 0, 50, 100%
(3) 0-1-2-3: 0, 33, 66, 100%
Delay for switching off the lighting
Range
0 = Disabled (Default)
1 = Blind 1
0 = Disabled (default)
1 = Lights
2 = Blind 2
1 = On / Off
2 = 4 steps
3 = 10 steps
4 = Infinite
0 = Level
1 = Tilt
2 = Level + Tilt
1 = On / Off
2 = 4 steps
3 = 10 steps
4 = Infinite
0 = Level
1 = Tilt
2 = Level + Tilt
1 = 0-1 (default)
2 = 0-1-2
3 = 0-1-2-3
0...1.800s (default 30s)
41