Advertisement
OPTIONAL EXTENDING THE COLUMNS
EXTEND VERTICAL COLUMNS
i. Insert item B7 halfway into the non-threaded
end of item B1.
The two joining bars with item B8 go in the
front of the column and the 2 joining bars
with item B9 go in the back.
IMPORTANT:
Joining bars should be
inserted into the non-threaded end of
the 180cm column.
THREADED
Front of Column
ii. The two joining bars with grub screws
(item B8) in the front of the column.
B8
B7
x
Back of Column
The two joining bars with hex bolts
(item B9) in the rear of the column.
B1
B9
B1
B7
8
B1
Tighten hex bolts by hand.
Finish tightening using a
10mm spanner.
THREADED
Advertisement
