Advertisement
10.
ADD END CAPS AND COVERS
i. After screen cables are connected and routed down the back of item B1,
partially clip on the cable management item B3, this allows easy removal if
more cables need adding. Once satis ed all cables are tted, clip the covers on fully.
ii. Fit items B2 to the top of item B1.
iii. Fit items D2 to the ends of item D1.
iv. With a knife, cut to length item B4 and insert to the front
and sides of item B1.
B4
WARNING! Contact a professional AV installer or other suitably quali ed person for any further operation or removal of equipment after installation
PLASTIC INSERTS
B4
B1
B4
22
CABLE
B3
B1
B2
D2
D1
D2
D1
B4
Advertisement
