Optional Add-Ons - Spraying Systems Co AutoJet 1000+ Owner's Manual

3.4 OPTIONAL ADD-ONS

These add-on systems are for any liquid delivery supply units.
— HD15 IN-LINE HEATER
For applications that require heating the HD15 In-Line Heater is an optional add-on for
the Food Coating Supply Unit. The In-Line construction allow heating to be achieved only
on-demand for optimal response and energy efficiency. For more information refer the
HD-15 In-Line Heater Owner's Manual.
— AUTO-REFILL
Auto-Refill is an optional module that helps refill the supply tank during operation and recirculation. The
auto refill system can be added to the Food Coating System and requires a level sensor connection to
attach to the control panel. The level sensor displays the current tank level as a
percent to full. The refill setpoint can be adjusted for user preference.
— TRANSFER PUMP
Easily transfer low to medium viscosity liquids out of drums and totes. Air driven
sanitary design, 2:1 ratio piston pump, with air regulator.
— FLOW METER
Designed for the 2150+ Spray Control Panel measures the flow of the nozzle
— PRESSURE SENSOR
Designed for the 2150+ Spray Control Panel to provide liquid pressure monitoring
and application adjustment.
7
Level Sensor
for Auto Refill
Transfer
Pump