Summary of Contents for Spraying Systems Co AutoJet 1000+
Page 1
AUTOJET 1000+ SPRAY CONTROL PANEL ® QUICK START GUIDE Each user’s setup will be different and may or may not include all the connections or features that are listed. See owner’s manual for more information on connections. Scan the QR code, or visit spray.com/autojetspraycontrol, to access manuals, videos and additional resources on the AutoJet 1000+ control panel.
8.00" (203.2 mm) MOUNT 0.27" 5.44" (138 mm) (6.8 mm) THE PANEL If mounting on a wall use anchors that are designed 1000+ Spray Control to support at least 15 lbs. (6.8 kg), according to the anchor manufacturer’s specifications. If mounting to an AutoJet system use provided hardware.
ADDITIONAL CONNECTIONS IF APPLICABLE 1. TRIGGER OR SENSOR Connect trigger or sensor devices to the TRIG A and 1000 TRIG B connections that will be used to start spray PRAY ONTROL ANEL sequence. Available triggers are as follows, the one used should be based on the customer’s application.
POWER UP THE PANEL Plug into grounded 100/240VAC, 3A, single phase GFCI outlet. Turn power on. HMI display will illuminate. 1000 To set spray parameters and for HMI operation, please PRAY ONTROL ANEL refer to the Application Settings in the owner’s manual. TRIG A OUT A FLOAT A...
Need help?
Do you have a question about the AutoJet 1000+ and is the answer not in the manual?
Questions and answers