Table of Contents
Advertisement
Receiver Operation
Chapter 9
Establishing the connection
The VIP must be provided with a valid IP address to operate on your network.
The following default address has been pre-set at the factory: 192.168.0.2
– Start the Web browser.
– Enter the IP address of the VIP as the URL. The connection will be
established, and after a short time the Decoder connection page will appear.
The Decoder connection page
After the connection has been established, the Decoder connection page will be
displayed and the unit automatically scans the network for available senders.
Preview
In this area you can select one of the video sources found in the network. A
snapshot of the video image from the selected video source is displayed. In
addition to the unit name the snapshot provides other means of identifying the
sender.
96
VIP 10
Advertisement
Table of Contents
