Table of Contents
Advertisement
Configuring the Sender
Chapter 6
Destination IP address:
For each number, enter the corresponding IP address of the desired remote unit.
Destination password:
Enter the password, if the remote unit is protected by a password.
Auto-connect:
Select On if an active connection should be reestablished automatically to one of
the previously specified IP addresses after each restart, e.g. after a connection
breakdown or network dropout.
Motion detector
The VIP has an integrated video sensor which can detect changes in the signal.
Such changes are due primarily to movements in the camera's field of view.
The sensitivity of the video sensor can be adjusted, so an alarm is generated only
if specified values are exceeded.
50
VIP 10
Advertisement
Table of Contents
