Table of Contents
Advertisement
Chapter 7
Trigger relay:
Click the button to switch the relay manually (for example for test purposes or to
operate a door opener).
COM1
The RS232/485serial interface port can be configured to meet your requirements.
Serial port function:
If you want to use the serial interface to transmit transparent data, select
Transparent. To operate the VIP with a terminal, choose Terminal.
Note
After selecting an interface function, the remaining parameters in the
window are set automatically and should not be altered.
Camera ID:
If necessary, adjust the ID for the peripheral device that is to be controlled (e.g.
dome camera or PTZ).
VIP 10
Configuring the Receiver
79
Advertisement
Table of Contents
