Table of Contents
Advertisement
Safety Information
Electrical shock hazard
Never attempt to connect the unit to any power network other than the type for
which it was intended.
Use only the power supply provided.
Never open the casing!
If a fault occurs, disconnect the power supply unit from the mains supply and
from all other devices.
Install the unit and power supply only in dry, weather-protected areas.
If safe operation of the unit cannot be guaranteed, remove it from service and
secure it to prevent unauthorized start-up. Safe operation can no longer be
guaranteed, for example,
– if there is visible damage to the unit or power cables,
– if the unit no longer works properly,
– if the unit has been exposed to rain or moisture,
– if foreign matter has infiltrated the unit,
– after long storage under adverse conditions or
– after exposure to higher than normal stress during transport.
In such cases, have the unit checked by VCS.
VIP 10
2
9
Advertisement
Table of Contents
