Table of Contents
Advertisement
Configuring the Receiver
Disturbance sensitivity level:
Here you can define at what level the text display is triggered. The lower the value
the higher the sensitivity level of the VIP.
Notification text:
Enter the text that is to be displayed on the monitor. It can contain up to 31
characters.
Audio stream
In addition to video data, the unit can also send and receive audio signals. The
transmission of audio takes place at the same time as that of the video data in a
separate data stream. Thus it increases the data traffic. The audio data is coded
according to G.711 compression standard and requires an additional bandwidth
of about 80 kBit/s per direction.
Note
Sending of audio signals via the receiver is only possible if the audio
function of the sender is enabled (see page 74) and the checkbox Include
audio on the Decoder connection page is activated (see page 97).
Enable audio:
To transmit a separate G.711 audio stream choose On.
74
Chapter 7
VIP 10
Advertisement
Table of Contents
