Using The Radio Data System (Rds) To Receive Fm Stations - JVC RX-E51BEB Instructions Manual

Using the Radio Data System (RDS)
to receive FM stations
Only the buttons on the remote control are used for RDS
operations.
When operating the receiver using the remote control,
set the mode selector to "AUDIO/TV/VCR/STB."
RDS allows FM stations to send an additional signal along with
their regular program signals. For example, the stations send their
station names, as well as information about what type of program
they broadcast, such as sports or music, etc.
When an FM station which provides the RDS service is tuned in,
the RDS indicator lights up on the display.
RDS indicator
EQ C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO
LPCM L C R PL
DOLBY D NEO : 6
S . WFR LFE
DTS AAC DSP 3D
LS SB RS
96 / 24 AUTO SR
RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
ATT
HP
MHz
kHz
With the receiver, you can receive the following types of RDS
signals:
PS (Program Service):
PTY (Program Type):
RT (Radio Text):
Enhanced Other Networks:
NOTES
• RDS is not available for AM (MW) broadcasts.
• RDS may not operate correctly if the station tuned is not
transmitting RDS signal properly or if the signal strength is
weak.
What information can RDS signals provide?
You can see the RDS signals the station sends on the display.
Press DISPLAY while listening to an FM station.
• Each time you press the button, the display changes to show
the following information:
PS
Frequency
(Normal indication)
PS (Program Service):
While searching, "PS" appears and then the station names will
be displayed. "NO PS" appears if no signal is sent.
PTY (Program Type):
While searching, "PTY" appears and then the type of the
broadcast program will be displayed. "NO PTY" appears if no
signal is sent.
RT (Radio Text):
While searching, "RT" appears and then text messages the
station sends will be displayed. "NO RT" appears if no signal is
sent.
Frequency:
Station frequency (non-RDS service).
About characters shown on the display
When the display shows PS, PTY, or RT signals, the following
characters are used:
• The display cannot show accented letters, "A" for instance, may
stand for accented "A's" like "Å, Ä, Ã, Á, À, Â, å, ä, ã, á, à, and
â."
NOTE
If searching finishes at once, "PS," "PTY," and "RT" will not appear
on the display.
Shows commonly known station
names.
Shows types of broadcast
programs.
Shows text messages the station
sends.
See page 28.
PTY
RT
25