Delta FOUL V3 Installation Manual page 20

5. Installation of Chamber
5.8 INSTALLATION OF CHAMBER - SECTION G
Installing pump in chamber and AlertMaxx2 EC
31
Pull the pump and AlertMaxx2 EC cables
through the cable duct. Coil 1m of pump and
alarm cable inside the chamber to allow for
maintenance.
33
Turn mains supply on and lift the pump float
to test the water is discharging correctly.
18
FOUL V3 INSTALLATION GUIDE
32
Isolate mains supply and connect the pump
and AlertMaxx2 EC according to the wiring
diagram on page 19
34
To test float switch, refer to the AlertMaxx2
EC installation instructions.