Table of Contents
Advertisement
SECTION 15 – Declarations
1. Declaration of Conformity for Recreational Craft Propulsion Engine with the
requirements of Directive 2013/53/EU.
Name of Engine Manufacturer: E.P.Barrus LTD
Name of Authorised Representative: E.P.Barrus LTD
Address: E.P.Barrus LTD, Launton Road, Bicester, Oxon, OX26 4UR, England, United Kingdom
Name of Notified Body for exhaust emission assessment: HPi Verification Services (Ireland) Ltd
Address: HPi Verification Services (Ireland) Ltd, Clonross
Town: Dunshaughlin
Conformity assessment module used for exhaust emissions:
Or engine type-approved according to: Directive 2013/53/EU
Other Community Directives applied:
Engine Type: Inboard Engine
Identification of Engine(s) covered by this Declaration of Conformity
Engine Model
Shire 70
Essential Requirements
Annex 1.B- Exhaust Emissions
B.1 Engine Identification
B.2 Exhaust emission
requirements
B.3 Durability
B.4 Owner's Manual
Annex 1. C- Noise Emissions
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of
the engine manufacturer that the engine(s) [is (are) in conformity with the type(s) for which above mentioned
EC type-examination or type approval certificate(s) has (have) been issued and]
requirements of Directive 2013/53/EU when installed in a recreational craft, in accordance with the engine
manufacturer's supplied instructions and that this (these) engine(s) must not be put into service until the
recreational craft which it is (they are) to be installed has been declared in conformity with the relevant provisions
of the above mentioned Directives.
RDG603A81 – Issue 2
Country: Ireland
Description of Engine(s) and Essential Requirements
Fuel Type: Diesel
Engine Type
Engine Family code
4TNV98-ZNSA
Standards
Other normative
document/method.
RCD (II)
*
See Declaration of Conformity of the craft in which the engine(s) has(have) been installed
Tim Hart
Sales Director
Signed: Bicester, UK
Date: 01/01/2021
Post Code: A85 XN59
B+C
B+D
B+E
Combustion Cycle: 4 Stroke
Type Approval Certificate Number
HPiVS-iR1105-T006-I-01-00
Technical
Specify in more detail
file
*= Mandatory standard.
2013/53 EU
* EN ISO 8178
2013/53 EU-4:2017 Test Cycle 1
ISO10240
1
will meet the exhaust emission
ID Number: 2810
B+F
G
H
Page 69 of 93
Advertisement
Table of Contents
