Table of Contents
Advertisement
Description
1
Tachometer Gauge
2
Hour Meter
3
Water Temperature Warning Light
4
Oil Pressure Warning Light
50A Alternator Charge Warning
5
Light
150/240A Alternator Charge
6
Warning Light*
7
Glow Plug Light
8
Key Flap and Ignition Switch
9
50A Alternator Output Gauge
10
Oil Pressure Gauge
11
Water Temperature Gauge
*Only applicable if a second alternator is fitted to the engine
RDG603A81 – Issue 2
Procedure for Warning Light
Reduce the engine revs and stop the engine
within one or two minutes. Check the coolant
level (refer to 9. Cooling System of SECTION 7
- SERVICE PROCEDURE). If the coolant level is
incorrect, fill it to the correct level (refer to 9.
Cooling System of SECTION 7 - SERVICE
PROCEDURE) and restart the engine. If the
coolant level is correct and the fault is still
present, or there is a coolant leak, please contact
your local dealer.
Stop the engine immediately. Contact your local
dealer. Failure to stop the engine may result in
permanent engine damage.
This indicates that the alternator has stopped
charging. The engine can still be operated for a
short period of time. Contact your local dealer.
This indicates that the alternator has stopped
charging. The engine can still be operated for a
short period of time. Contact your local dealer.
This indicates that the cold start system is
operating. If the light fails to illuminate during the
starting procedure contact your local dealer.
-
-
-
-
-
-
Page 18 of 93
Advertisement
Table of Contents
