Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech POC-621 Series
Summary of Contents for Advantech POC-621 Series
- Page 1 User Manual POC-621 Series (DC-/ AC-in model) 21" Computer...
- Page 2 Repair of the device should only be carried out by trained service personnel. Advantech recommends that a service contract be obtained with Advantech Service and that all repairs also be carried out by them. Doing otherwise may compromise the correct functioning of this device.
- Page 3 The computer comes with a battery-powered real-time clock circuit. There is a danger of explosion if the battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manu- facturer. Discard used batteries according to the manufacturer’s instruc- tions. POC-621 Series User Manual...
- Page 4 Caution! When servicing the device, always use replacement parts that are quali- fied to Advantech standards. Advantech Medical cannot warrant or endorse the safe performance of third-party replacement parts for use with our medical device.
- Page 5 à l'utilisateur d'apprendre directement à utiliser le périphérique. Le texte fournit des explications et informe l'utilisateur, étape par étape, de l'utilisation pratique du produit, avec des instructions courtes et claires, dans une séquence fac- ile à suivre. POC-621 Series User Manual...
- Page 6 étiquettes affichées sur l’appareil. Toute réparation ne doit être effectuée que par un technicien de service qualifié. Advantech recommande d’obtenir un contrat de service avec Advantech Ser- vice afin d’effectuer toutes les réparations. Autrement, le fonctionnement adéquat de l’appareil serait compromis.
- Page 7 La procédure détaillée de fonctionnement est décrite dans l’annexe A. Classification: 1). Classe I 2). Aucune pièce applicable 3). Fonctionnement en continu 4). Pas une catégorie AP ou APG POC-621 Series User Manual...
- Page 8 à sec. ATTENTION! Lors de l’entretien de l’appareil, utilisez toujours des pièces de rechange conformes aux exigences d’Advantech. Advantech Digital Healthcare ne peut garantir ni approuver la performance sécuritaire des pièces de rechange fournies par un tiers pour être utilisées avec notre appareil médical.
- Page 9 ISO 7000-0434: Caution, consult accompanying documents. ISO 7000-1641: Follow operating instructions or consult instructions for use. IEC 60417 -5009: stand-by. IEC 60417-5032: Alternating current IEC 60417-5031: Direct current. IEC 60417-5021: Equipotentiality. ISO 7010-M002: Follow instructions for use POC-621 Series User Manual...
- Page 10 Avertissement! Toute modification apportée à l'équipement sans l'approbation explicite de l'autorité de normalisation compétente pourrait annuler votre droit à utiliser l'équipement. POC-621 Series User Manual...
- Page 11 List of Accessories Before installing your Point of Care Terminal, ensure that the following materials have been received: POC-621 SERIES Point-of-Care Terminal Mounting kits and a packet of screws 1 x VESA mounting note 1 x China RoHs note ...
- Page 12 Additional Information and Assistance Contact your distributor, sales representative, or Advantech's customer service cen- ter for technical support if you need additional assistance. Please have the following information ready before you call: Product name and serial number Description of your peripheral attachments ...
-
Page 13: Table Of Contents
Intended User Profile ................9 Front Bezel Button .................. 10 Chapter System Setup ........13 A Quick Tour of the POC-621 Series ............14 2.1.1 Front view ................... 14 Figure 2.1 Front View of the Point-of-Care Terminal ....14 2.1.2 Rear View ................... 14 Figure 2.2 Rear View of the Point of Care Terminal .... - Page 14 Battery Warnings ..................38 Battery Safety Instruction................ 39 Emergency Scenarios................43 Battery Storage and Transportation............44 Battery Disposal..................45 Appendix A POC-621 Series VESA Mounting ..47 Install VESA Mounting ................48 Figure A.1 VESA Mounting ............48 Appendix B Driver Installation......
-
Page 15: Chapter 1 General Information
Chapter General Information... -
Page 16: Introduction
Introduction Advantech POC-621 is a multimedia Intel® Core™ i7/i5/Celeron processor solution designed for mobile computing as a Point-of-Care terminal (POC). It is a PC-based system with 21.5" wide screen TFT LCD display, HDMI out, dual on-board 10/100/ 1000 PCIE Ethernet controllers, and 1 x LAN port. It supports Intel AMT11 functions. - Page 17 523 x 356 x 62 mm (20.59 x 14.02 x 2.44 in) (W x D x H) Physical Weight (Bare sys- 6.29 kg/13.86 lb Characteristics tem) 100 x 100 mm, 75 x 75 mm/3.93 x 3.93 in, 2.9 x 2.9 VESA Mount POC-621 Series User Manual...
- Page 18 Optional with 2 x batteries (choose either backup tery module battery or hot swapping battery module) Camera 5MP, Auto Focus TPM 1.2/2.0 TPM 2.0 (default via firmware) 21.5”, Default clear glass/Optional AR/ Optional AG Touch Panel Coating POC-621 Series User Manual...
-
Page 19: Dimensions
Dimensions Dimensions: 523 x 356 x 62 mm; 20 x 14 x 2.44 in Figure 1.1 Dimensions of the POC-621 Figure 1.2 POC-621 Hot Swappable Battery Pack Dimensions POC-621 Series User Manual... - Page 20 Figure 1.3 POC-621 with Smart Card Reader Dimensions Figure 1.4 POC-621 with RFID & Camera Accessory Dimensions POC-621 Series User Manual...
- Page 21 Avertissement! Utilisez un appareil de montage approprié pour éviter tout risque de blessure, il doit être monté par un personnel formé et autorisé sur des tolérances adéquates pour la qualité des matériaux util- isés pour effectuer la connexion Figure 1.6 POC-621 Series Front Panel Power Volume Up/Down Touchscreen Status Control...
-
Page 22: Optional Modules
Do not use disinfectants that contain phenol. Do not autoclave or clean the POC or its peripherals with strong aromatic, chlorinated, ketone, either, or ether solvents, sharp tools or abrasives. Never immerse electrical connectors in water or other liquids. POC-621 Series User Manual... -
Page 23: Operating Principle
Language understanding: English, whenever other languages are required, a professional translation company shall translate and review by the manufac- turer, see SOP document number: XXXXX Experience: Mentally and physical competent, specific medical training to understand basic knowledge for symbols. Permissible impairments: POC-621 Series User Manual... -
Page 24: Front Bezel Button
The operator can turn off the backlight at night to prevent disturbing patient’s sleep. This backlight off event will resume backlight automatically following system shut- down and system activation. POC-621 Series User Manual... - Page 25 POC-621 Series User Manual...
- Page 26 POC-621 Series User Manual...
-
Page 27: Chapter 2 System Setup
Chapter System Setup... -
Page 28: A Quick Tour Of The Poc-621 Series
These are illus- trated in the figures below. When you place the POC-621 Series upright on the desktop, its front panel appears as shown in the following figure — Figure 2.1. - Page 29 Figure 2.3 Rear View of Multi I/O ports (AC-in model) Figure 2.4 Rear View of Multi I/O ports (DC-in model) Note! The equipotential terminal needs to be connected to a ground in the hospital before system boot to protect the operator and the system. POC-621 Series User Manual...
-
Page 30: Installation Procedures
Warning! Miss direction plug-in may damage the POC system or adapter. ATTENTION! La prise DCIN de l'adaptateur a une direction spécifique. Veuillez aligner correctement la fiche et le connecteur DCIN. AVERTISSEMENT! Le plugin Miss direction peut endommager le système POC ou l'adaptateur. POC-621 Series User Manual... -
Page 31: Connecting The Acin
Connecting the Ground pin System ready and find the Equipotential Terminal on rear side of POC. An Equipotential Terminal is provide to optionally connect to a hospital ground/ earth system Figure 2.6 POC-621 Equipotential Terminal Pin POC-621 Series User Manual... -
Page 32: Running The Bios Setup Program
CMOS RAM and compares them to the equipment check conducted during the power on self-test (POST). If an error occurs, an error message will be displayed on screen, and you will be prompted to run the setup program. POC-621 Series User Manual... -
Page 33: Installing System Software
The various drivers and utilities in the CD-ROM disc have their own text files which help users install the drivers and understand their functions. These files are a very useful supplement to the information in this manual. All the drivers are can be downloaded from the Advantech website. POC-621 Series User Manual... -
Page 34: Troubleshooting
Adapter Power LED off The adapter indicator’s green LED remains off. Check that the AC power cord is plugged into the adapter properly Check that the AC power cord is plugged into the wall inlet properly. POC-621 Series User Manual... -
Page 35: Poc System Powers On But Windows Fails To Boot
In another words, if the battery capacity is 99% or 100%, the charger will not continue charging this battery. Contact your distributor, sales representative, or Advantech's customer service cen- ter for technical support if you need additional assistance. Please have the following... -
Page 36: Emc Declaration
Guidance and manufacturer’s declaration – electromagnetic emissions The model POC-621 SERIES is intended for use in an electromagnetic environment as specified below. The customer or the user of the POC-621 SERIES should assure that it is used in such an environment. - Page 37 Guidance and manufacturer’s declaration – electromagnetic immunity POC-621 SERIES is intended for use in the electromagnetic environment specified below. The customer or the user of the model POC-621 SERIES should assure that it is used in such an environment. IEC 60601 test...
- Page 38 Guidance and manufacturer’s declaration – electromagnetic immunity The model POC-621 SERIES is intended for use in the electromagnetic environment spec- ified below. The customer or the user of the model POC-621 SERIES should assure that it is used in such an environment.
- Page 39 RF transmitters, an electromagnetic site survey should be consid- ered. If the measured field strength in the location in which the model POC-621 Series is used exceeds the applicable RF compliance level above, the model POC-621 Series should be observed to verify normal operation.
- Page 40 POC-621 Series User Manual...
-
Page 41: Hot Sw. Battery Pack Operation
Chapter Hot Swapping Battery Pack Operation... -
Page 42: Installing Hot Swappable Battery Packs
Installing Hot Swappable Battery Packs 1. Open the battery door: Users can access the battery slot using the arrowhead buttons (circled in red below). 1) Press the arrowhead button. 2) Pull open the door to access the battery slot. POC-621 Series User Manual... - Page 43 Caution! Please hold the battery with both hands when installing the battery into the slot of the backpack. ATTENTION! Veuillez tenir la batterie à deux mains lors de l'installation de la batterie dans la fente du sac à dos. POC-621 Series User Manual...
- Page 44 Caution! Lay the pull ring and mylar (indicated in the image below) flat in their original position before closing the door. ATTENTION! Placez l'anneau de traction et le mylar (indiqués dans l'image ci-dessous) à plat dans leur position d'origine avant de fermer la porte. POC-621 Series User Manual...
-
Page 45: Battery Pack Charge Capacity Indicator
Battery Pack Charge Capacity Indicator Battery pack charge capacity indicator. Press the below red circle button, and the battery pack will turn on the indicator to show its capacity percentage. The illuminated LED represents the battery capacity. POC-621 Series User Manual... -
Page 46: Hot Swapping Battery Pack Battery Capacity Indicator And Windows Battery Information
POC system is turned off. This setting could save the battery’s life. 2. Windows Battery Icon The Windows battery icon shows each batteries’ capacity percentage and dual bat- tery’s average capacity percentage. POC-621 Series User Manual... -
Page 47: Regular Use Of Battery Pack
Un-balanced mode (Two batteries are different battery voltage): Charge: Charge low voltage battery first. When these two battery reach same voltage, charge two batteries together. Discharge: Charge high voltage battery first. When these two battery reach same voltage, discharge two batteries together. POC-621 Series User Manual... - Page 48 POC-621 Series User Manual...
-
Page 49: Operation And Safety
Chapter Operation and Safety... -
Page 50: General Safety Guide
Avertissement! 1. Si la température est trop élevée ou trop basse, vos batteries peuvent être endommagées. 2. Si la température est trop élevée ou trop basse, vos batteries peuvent arrêter la charge. La batterie peut redémarrer la charge lorsque sa température revient à une température spécifique. POC-621 Series User Manual... -
Page 51: Disconnect The Power
N'allumez jamais votre ordinateur tant que toutes ses pièces internes et externes ne sont pas en place. Faire fonctionner l'ordinateur lorsqu'il est ouvert ou qu'il manque des pièces peut être dangereux et peut endommager votre ordi- nateur. POC-621 Series User Manual... -
Page 52: Proper Handling
Lithium batteries have a predetermined life span. Replace old bat- teries with new batteries when they have reached the end of their service life (the warranty is for 1 year or 300 cycles with 70% nor- mal capacity, according to which occurs first). POC-621 Series User Manual... -
Page 53: Battery Safety Instruction
300 cycles avec 70% de capacité normale, selon ce qui survi- ent en premier). Battery Safety Instruction The POC-621 system should only be powered by an Advantech battery pack or compatible battery pack supplied by Advantech. Warning! 1) Do not insert non-Advantech battery packs into the POC-621 system. - Page 54 Do not expose the battery pack to fire or high temperatures. Warning! Exposure to high temperatures may cause the battery to explode. AVERTISSEMENT! L'exposition à des températures élevées peut provoquer l'explo- sion de la batterie. POC-621 Series User Manual...
- Page 55 Caution! When the battery is fully recharged, disconnect it from the computer or unplug the power cable. ATTENTION! Lorsque la batterie est complètement rechargée, déconnectez-la de l'ordinateur ou débranchez le câble d'alimentation. POC-621 Series User Manual...
- Page 56 Do not discharge the battery pack using any device other than the POC-621 system or a device specified by Advantech. Warning! Using the battery pack to power devices other than the POC-621 system may damage the battery, limit performance, or reduce the battery life capacity.
-
Page 57: Emergency Scenarios
If any of the above conditions are observed, place the battery pack and charger outside on a concrete floor, away from any flammable materials for approximately 15 minutes and contact Advantech. Do not attempt to reuse the battery pack. In the event that the battery is leaking and the fluid gets into your eye, rinse well with water and immediately seek medical care. -
Page 58: Battery Storage And Transportation
à 50%, rechargez la batterie avant de la remettre en stockage. Les piles peuvent fuir si elles sont laissées dans l'appareil pen- dant de longues périodes. Après de longues périodes de stockage, vérifiez la batterie avant de la charger. POC-621 Series User Manual... -
Page 59: Battery Disposal
Les batteries usagées peuvent encore avoir une charge partielle. Si des batteries partiellement chargées entrent en contact avec d'autres batteries ou des objets métal- liques, l'énergie stockée restante peut être déchargée et provoquer un incendie ou une explosion. POC-621 Series User Manual... - Page 60 POC-621 Series User Manual...
-
Page 61: Series Vesa Mounting
Appendix POC-621 Series VESA Mounting... -
Page 62: Install Vesa Mounting
The POC-621 supports standards VESA mounting to help system integrators conve- niently integrate the panel PC into their system. Never use mounting brackets except as provided by Advantech to prevent unreliable mounting of the POC-621. VESA mount installation should be carried out by a pro- fessional technician;... -
Page 63: Driver Installation
Appendix Driver Installation... -
Page 64: Driver Installation
Graphics driver install complete, please install IGCC by powershell. Audio Intel Management Engine Driver Intel Rapid Storage Technology Wireless Card (Wi- Optional Fi+Bluetooth) RFID Optional Smart Card Optional POC-621 Series User Manual... -
Page 65: Pcm-8722 Connector
Appendix PCM-8722 Connector... -
Page 66: Pcm-8722 Connector Map
PCM-8722 Connector Map POC-621 Series User Manual... - Page 67 POC-621 Series User Manual...
- Page 68 POC-621 Series User Manual...
-
Page 69: Pcm-8722 Jumper
Appendix PCM-8722 Jumper Settings... -
Page 70: Pcm-8722 Jumper Setting
MB Top side Jumper Setting: ME Manufacturing Mode Clear CMOS Clear ME (Reserved, Not installed) System Reset (Reserved, Not installed) CN13 LVDS Voltage CN40 Power Button (Reserved, Internal Test Only) PCN4 Power Debug (Reserved) Board Setup Panel Setup POC-621 Series User Manual... - Page 71 Description Clear ME Setup Setting Function (1-2) Clear ME Setup (No Connect) Normal Operation (Default) Table D.4: CN8 (Not Install) System Reset Description Reset system button Setting Function (1-2) System Reset (No Connect) Normal Operation (Default) POC-621 Series User Manual...
- Page 72 Table D.7: PCN4 Power Debug (Reserved) Description Power Debug, Internal Test Only Setting Function (No Connect) Normal Operation (Default) Table D.8: SW1 Board Setup Description Select Board setting Setting Function (SW1-1/2/3) Select board type (SW1-4) Force Speaker always ON POC-621 Series User Manual...
- Page 73 1600x900 24 bits Dual Low(ON) Low(ON) Low(ON) Hi(OFF) 1366x768 24 bits Single Low(ON) Hi(OFF) Hi(OFF) Low(ON) 1280x1024 24 bits Dual Low(ON) Hi(OFF) Low(ON) Low(ON) 1024x768 24 bits Single Low(ON) Low(ON) Low(ON) Low(ON) 800x600 18 bits Single POC-621 Series User Manual...
- Page 74 POC-621, with audio board, 5V LVDS Panel SW1 Pin 1 SW1 Pin 2 SW1 Pin 3 SW1 Pin 4 SW2 Pin 1 SW2 Pin 2 SW2 Pin 3 SW2 Pin 4 CN13 Hi(OFF) Hi(OFF) Hi(OFF) Hi(OFF) Low(ON) Hi(OFF) Hi(OFF) Hi(OFF) (1-2) POC-621 Series User Manual...
-
Page 75: Advanced Bios
Appendix Advanced BIOS Functions... -
Page 76: Advanced Bios Functions
BIOS Menu location: BIOS Menu – Advanced – IT5121 HW Monitor – Volume Button Control Enable: Front bezel volume adjust button control function work. (Default) Disable: Front bezel volume adjust button control function not work. POC-621 Series User Manual... - Page 77 7. SETUP POPUP MENU F12 You can press F12 key Setup popup menu in system boot. When you press F12 key in bootup, BIOS will display a bootable device menu and you can select proper boot device that you want. POC-621 Series User Manual...
- Page 78 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2022...