Inspection References; Ball-Locking Pins - L-Acoustics S Series Owner's Manual

Inspection and preventive maintenance

Inspection references

Ball-locking pins

Reference pictures
tether (Syva Wall)
Moving parts
1. Press the push button. The ball-locking mechanism is retracted.
2. Release the button. The ball-locking mechanism is activated.
3. Insert the pin in its storage and rigging locations.
If the pin is inserted in two plates, the ball must pass between both plates and lock the pin in place.
If the check fails, immediately withdraw the product from use and contact L-Acoustics.
Related tasks
Rigging part inspection (p.32)
38 Syva owner's manual (EN) version 1.0