Rigging check
Active check of the stacking mechanism of Syva. Refer to the
instructions, screwdriver bits, and Torque.
Procedure
1. Remove the protection plate and inspect the mechanical interface.
• The lodgings are not worn out.
• The four magnets are present.
• The AutoConnect connector is not damaged.
• The mechanical interface is tightly secured to the cabinet.
2. Stack Syva on top of Syva Low and Syva Base.
• The lodgings meet the studs.
3. Gently push Syva from side to side.
• The assembly remains stable.
Syva owner's manual (EN) version 1.0
magnet (x4)
lodging (x4)
AutoConnect
Rigging procedures
(p.44) for further rigging
Inspection and preventive maintenance
39