Cast Wheels; Adjusting The Clutch Lever Free; Play - Yamaha MT-10 2019 Owner's Manual

Table of Contents

Advertisement

WARNING
This motorcycle is fitted with su-
per-high-speed tires. Note the fol-
lowing points in order to make the
most efficient use of these tires.
Use only the specified replace-
ment tires. Other tires may run
the danger of bursting at super
high speeds.
Brand-new tires can have a rela-
tively poor grip on certain road
surfaces until they have been
"broken in". Therefore, it is ad-
visable
before
doing
high-speed riding to ride con-
servatively for approximately
100 km (60 mi) after installing a
new tire.
The tires must be warmed up
before a high-speed run.
Always adjust the tire air pres-
sure according to the operating
conditions.
Periodic maintenance and adjustment
EWA10601

Cast wheels

To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.
The wheel rims should be checked
for cracks, bends, warpage or oth-
er damage before each ride. If any
damage is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.
any
The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
EAU21963

Adjusting the clutch lever free

play

Measure the clutch lever free play as
shown.
1
1. Clutch lever free play
2. Clutch lever free play adjusting bolt
Periodically check the clutch lever free
play and, if necessary, adjust it as fol-
lows.
To increase the clutch lever free play,
turn the clutch lever free play adjusting
bolt at the clutch lever in direction (a).
To decrease the clutch lever free play,
turn the adjusting bolt in direction (b).
7-19
2
(a)
Clutch lever free play:
5.0–10.0 mm (0.20–0.39 in)
EAU74130
1
2
3
4
(b)
5
6
7
8
9
10
11
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtn1000 2019

Table of Contents