Instrument And Control Functions; Immobilizer System - Yamaha MT-10 2019 Owner's Manual

Instrument and control functions

1

Immobilizer system

2
3
4
5
1. Code re-registering key (red bow)
6
2. Standard keys (black bow)
This vehicle is equipped with an immo-
7
bilizer system to help prevent theft by
re-registering codes in the standard
8
keys. This system consists of the fol-
lowing:

a code re-registering key
9

two standard keys

a transponder (in each key)
10

an immobilizer unit (on the vehicle)

an ECU (on the vehicle)
11 
a system indicator light (page 4-7)
About the keys
12
The key with the red bow is used to reg-
ister codes in each standard key. Store
EAU10979 the code re-registering key in a safe
place. When necessary, take the vehi-
cle along with all three keys to a
Yamaha dealer to have them re-regis-
tered.
Do not use the key with the red bow for
driving. It should only be used for
re-registering the standard keys. Al-
ways use a standard key for driving.
TIP

Keep the standard keys as well as
keys of other immobilizer systems
away from the code re-registering
key.

Keep other immobilizer system
keys away from the main switch as
they may cause signal interfer-
ence.
NOTICE
DO NOT LOSE THE CODE RE-REG-
ISTERING KEY! CONTACT YOUR
DEALER IMMEDIATELY IF IT IS
LOST! If the code re-registering key
is lost, the existing standard keys
can still be used to start the vehicle.
However, registering a new stan-
dard key is impossible. If all keys
have been lost or damaged, the en-
tire immobilizer system must be re-
placed. Therefore, handle the keys
carefully.








ECA11823
4-1
Do not submerse in water.
Do not expose to high tempera-
tures.
Do not place near magnets.
Do not place near items that
transmit electrical signals.
Do not handle roughly.
Do not grind or alter.
Do not disassemble.
Do not put two keys of any im-
mobilizer system on the same
key ring.