Yamaha MT-10 2019 Owner's Manual page 30

Instrument and control functions
Speedometer
1
1
2
3
4
5
1. Speedometer
6
The speedometer shows the vehicle's
traveling speed.
7
Tachometer
8 1
9
10
11
1. Tachometer
12
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer will sweep across the r/min
range and then return to zero r/min in
order to test the electrical circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11800 r/min and above
Clock
1
2
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. Turn the key to "ON".
2. Push the "CLOCK" button for two
3. When the hour digits start flashing,
ECA10032 4. Push the "CLOCK" button, and the
5. Push the "RESET" button to set
6. Push the "CLOCK" button and
Fuel meter
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
4-9
seconds.
push the "RESET" button to set the
hours.
minute digits will start flashing.
the minutes.
then release it to start the clock.
1