Yamaha MT-10 2019 Owner's Manual page 35

Table of Contents

Advertisement

"AVE – –.– km/L": The average
distance that can be traveled on
1.0 L of fuel is shown.
"AVE – –.– L/100 km": The aver-
age amount of fuel necessary to
travel 100 km is shown.
"AVE – –.– MPG": The average
distance that can be traveled on
1.0 Imp.gal of fuel is shown.
To switch between the "km/L" and
"L/100 km", push the "CLOCK" and
"RESET" buttons at the same time.
To reset the average fuel consumption,
push the "RESET" button for two sec-
onds.
TIP
After resetting the average fuel con-
sumption, "– –.–" will be shown until the
vehicle has traveled a sufficient dis-
tance.
Instrument and control functions
Brightness and shift indicator light
control mode
1
1. Brightness level display
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.
Screen brightness:
This function allows you to adjust
the brightness of the screen.
Shift indicator light style:
This function allows you to set the
indicator light to on, flash, or off.
Shift indicator light on r/min:
This function allows you to select
the engine speed at which the indi-
cator light will be activated.
Shift indicator light off r/min:
4-14
This function allows you to select
the engine speed at which the indi-
cator light will be deactivated.
Shift indicator light brightness:
This function allows you to adjust
the brightness of the shift indicator
light.
TIP
The brightness level display shows the
brightness level setting.
To adjust the brightness of the screen
1. Turn the key to "OFF".
2. Push and hold the "CLOCK" but-
ton.
3. Turn the key to "ON", and then re-
lease the "CLOCK" button after
five seconds.
4. Push the "RESET" button to select
the desired brightness level.
5. Push the "CLOCK" button to con-
firm the selected brightness level.
The control mode changes to the
shift indicator light style function.
To set the shift indicator light style
1. Push the "RESET" button to select
one of the following style settings:
1
2
3
4
5
6
7
8
9
10
11
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtn1000 2019

Table of Contents