Yamaha MT-10 2019 Owner's Manual page 36

Instrument and control functions

On - the indicator light will come
1
on when activated. (This setting
is selected when the indicator
2
light stays on.)

Flash - the indicator light will
flash when activated. (This set-
3
ting is selected when the indica-
tor light flashes four times per
4
second.)

Off - the indicator light is deacti-
5
vated; in other words, it will not
come on or flash. (This setting
is selected when the indicator
6
light flashes once every two
seconds.)
7
2. Push the "CLOCK" button to con-
firm the selected indicator light ac-
8
tivity. The control mode changes to
the shift indicator light on r/min
function.
9
To set the shift indicator light on r/min
10
TIP
The shift indicator light can be set be-
11
tween 7000 r/min and 13000 r/min in in-
crements of 200 r/min.
12
1. Push the "RESET" button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the "CLOCK" button to con-
firm the selected engine speed.
The control mode changes to the
shift indicator light off r/min func-
tion.
To set the shift indicator light off r/min
TIP

The shift indicator light can be
set between 7000 r/min and
13000 r/min in increments of 200
r/min.

Be sure to set the off r/min to a
higher engine speed than the on
r/min setting, otherwise the shift
indicator light will not come on.
1. Push the "RESET" button to select
the desired engine speed for deac-
tivating the indicator light.
2. Push the "CLOCK" button to con-
firm the selected engine speed.
The control mode changes to the
shift indicator light brightness func-
tion.
4-15
To adjust the brightness of the shift in-
dicator light
1. Push the "RESET" button to select
the desired indicator light bright-
ness level.
2. Push the "CLOCK" button to con-
firm the selected indicator light
brightness level and exit the bright-
ness and shift indicator light con-
trol mode.