Handlebar Switches - Yamaha MT-10 2019 Owner's Manual

Instrument and control functions
To unlock the steering
1
1
2
3
4
5
1. Push.
2. Turn.
6
From the "LOCK" position, push the
key in and turn it to "OFF".
7
(Parking)
8
The hazard lights can be turned on, but
all other electrical systems are off. The
9
key can be removed.
The steering must be locked before the
10
key can be turned to "
NOTICE
11
Using the hazard lights for an ex-
tended length of time may cause the
12
battery to discharge.

Handlebar switches

2
Left
1
6
1. Select switch "SELECT"
2. Traction control system switch "TCS"
3. Cruise control switches
4. Horn switch "
EAU65680
5. Turn signal switch "
6. Dimmer/Pass switch "
".
ECA22330
EAU66055
2
5
4
"
/ "
/ /PASS"
4-3
Right
3
2
3
1. Stop/Run/Start switch "
2. Drive mode switch "MODE"
3. Hazard switch " "
Dimmer/Pass switch "
Set this switch to "
beam and to " " for the low beam.
To flash the high beam, push the pass
side "PASS" of the switch while the
headlights are on low beam.
TIP
When the switch is set to low beam,
only the left headlight bulb comes on.
When the switch is set to high beam,
both headlights come on.
1
/ / "
EAU73922
/ /PASS"
" for the high