Seat; Adjusting The Front Fork - Yamaha MT-10 2019 Owner's Manual

Seat

To remove the seat
1. Open the seat lock cover, insert
the key into the seat lock, and then
turn the key counterclockwise.
3
2
1
1. Seat lock cover
2. Seat lock
3. Unlock.
2. While holding the key in that posi-
tion, slide the seat backward and
then lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projections into the seat
holders as shown.
EAU57992
1
2
1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
Instrument and control functions

Adjusting the front fork

This model is equipped with adjustable
suspension. The spring preload, re-
bound damping force, and compres-
sion damping force of each leg can be
adjusted.
2
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
NOTICE


Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting nut on each fork in direc-
tion (a). To decrease the spring preload
4-22
WARNING
Use extra care to avoid scratch-
ing the gold-anodized finish
when making suspension ad-
justments.
To avoid damaging the suspen-
sion's internal mechanisms, do
not attempt to turn beyond the
maximum or minimum settings.
EAU70412
1
2
3
EWA10181
4
5
6
ECA22471
7
8
9
10
11
12