PB TEEN Small Space Solutions Desk Assembly Instructions

Small Space Solutions Desk

PRE-ASSEMBLY:

•
For your safety and ease, assembly by two adults is recommended.
•
Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
•
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The
shipping box provides and ideal work surface. Do not dispose of any contents until assembly is completed to
avoid accidentally discarding small parts or hardware.
•
Use the parts and hardware lists to identify and separate each of the pieces included prior to assembly.
•
Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
•
Do not use power drill as it may cause cracking.

HARDWARE LIST

C - Flat Washer – 8pcs
ASSEMBLY INSTRUCTIONS:
1. Place the Desktop (B) upside down on a soft, carpeted work place. Attach the (4) Legs (A) to the Desktop
using (8) Flat Washer (C), (8) Spring Washer (D) and (8) Nuts (E) in place and secure with a Wrench (F).
Upright the assembled Desk and adjust the levelers located on bottom of feet when required.

PARTS LIST

A – Leg – 4pcs
B – Desktop – 1pc
D - Spring Washer – 8pcs E – Nut – 8pcs
www.pbteen.com
F – Wrench – 1pc

CARE INSTRUCTIONS:

•
Dust with a clean, soft cloth.
•
Avoid the use of chemicals and
harsh cleaning agents.