Table of Contents
Advertisement
Quick Links
Beadboard Basic Desk
Pre-assembly:
•
Please read all instructions before starting to assemble.
•
Two-person is recommended during assembly..
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
•
An extra wooden knob is included for your convenience.
Hardware Included:
A - (4) Wooden knob bolts
(4 x 28mm)
Parts Included:
D – (2) Desk Pedestal
Tools Required:
(1) Phillips Screwdriver( not included)
B – (4) Wooden knobs
E – (1) Desk Top
1 of 6
www.pbteen.com
C – (1) Wooden knob with hardware attached
Advertisement
Table of Contents
Related Manuals for PB TEEN Beadboard Basic Desk
Summary of Contents for PB TEEN Beadboard Basic Desk
- Page 1 Beadboard Basic Desk Pre-assembly: • Please read all instructions before starting to assemble. • Two-person is recommended during assembly.. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • An extra wooden knob is included for your convenience.
- Page 2 Assembly: 1. For the Pedestals, gently insert Wooden knob with hardware attached (C) into the pre-drilled holes on the front of the sliding breadboard. Attach Wooden Knobs (B) to drawers by holding Wooden Knobs (B) over pre-drilled hole in drawer fronts. Screw Wooden Knob bolts (A) through the rear of the drawer so that it enters the Wooden Knob (B).
- Page 3 Beadboard Small Desk Hutch Pre-assembly: ․Please read all instructions before beginning assembly. ․We recommend assembly by two adults. ․Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Hardware Included: A – Mending Plate- 2pcs B –...
- Page 4 Beadboard Large Desk Hutch Pre-assembly: • Please read all instructions before beginning assembly. • We recommend assembly by two adults. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • An extra wooden knob is included for your convenience. Hardware Included: A - (2) Wooden knob bolts B –...
- Page 5 Assembly: 1. On a soft, scratch-free surface, such as a carpet or rug, remove the hutch from box. 2. Using wooden knob hardware pack, carefully attach a Wooden knob (B) to a door, holding the knob over pre-drilled hole in door front. Screw a Wooden knob bolt (A) through the rear of the door so that it enters the Wooden knob (B), using Phillips screwdriver.
- Page 6 5. Locate a wall stud behind your furniture. Position a Bracket (E) on the stud approximately 1” below the top of the furniture. Mark and drill pilot hole into the center of the stud with a 3/32” drill bit. Attach a Bracket (E) to the stud with the Long Screws (F) provided.
Need help?
Do you have a question about the Beadboard Basic Desk and is the answer not in the manual?
Questions and answers