Languages; System Timing; I 2 C Interface; Table 5: Languages Supported By Eurotext - Texas Instruments EUROTEXT CF70200 Manual

UNIVERSAL TELETEXT DECODERS
'EUROTEXT' CF70200
The Eurotext device supports the following languages:
English
French
Polish*
In addition, the following languages are also supported through national option character sets:
National Option Character Set
German
Swedish*
Spanish*
Czech*
Serbo-Croat
* = On-chip (flicker-free) processing of packet 26 characters supported.
All system timing functions, including the 11.5625 MHz display pixel clock, are produced in the
digital PLL & TV sync timing block using the oscillator output from the Texas Instruments CF72306
or CF72416 data slicer. The display sync signals generated are flexible and can be software
controlled to provide interlaced or non-interlaced text displays with locked of unlocked field sync.
The Eurotext chip uses a digital PLL which can lock onto a VCR playback video signal, allowing
EUROTEXT to be used for OSD during VCR playback.
The EUROTEXT device acts as a slave transceiver and follows I
Data Transfer to EUROTEXT
The sending of command and data bytes to the EUROTEXT is initiated by the bus master which
places a start condition on the bus followed by the bus address with the R/W bit set to 0 (hex 22).
Command and data bytes are then transferred to the EUROTEXT which acts as a slave receiver. The
transfer can consist of any number of bytes and the transfer is terminated when the bus master places
a 'start' or 'stop' condition on the bus.
DRAFT 11

6.0 LANGUAGES

German
Spanish*
Rumanian*
Dutch, Flemish
Norwegian, Danish*, Finnish*, Greenland, Hungarian*
Basque*, Portuguese*, Catalan*, Faroese*, Icelandic*
Slovak*
Croat-Serbian, Slovenian, Croatian, Albanian

Table 5: Languages Supported by Eurotext

7.0 SYSTEM TIMING

2
8.0 I C INTERFACE
Swedish*
Turkish*
OSD Characters
Languages Supported
2
C-bus protocols.
15-Feb-96
'EUROTEXT'
CF70200
Italian
Czech*
Serbo-Croat
13
1Q96