SMART Rear Projection Board 1800 Installation Manual page 2

FCC Warning
This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception (this can be determined by turning the equipment off and on) the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
l
Consult the dealer or an experienced radio/TV technician for help.
l
Any changes or modifications to this "Class B" digital device that have not been expressly approved by SMART
Technologies Inc. could void the user's authority to operate the equipment.
Trademark Notice
Rear Projection SMART Board, SMART Board, Universal Projector Assembly, SMART X-Port, SMART Notebook,
SMART Pen Tray, SMART Aware and SMART Meeting Pro are trademarks of SMART Technologies Inc. All other
trademarks are for identification purposes only and are the property of their respective owners.
Copyright Notice
The use and copying of this product is subject to a license agreement. Any other use is prohibited. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in
any form by any means without the prior written consent of SMART Technologies Inc. Information in this manual is
subject to change without notice and does not represent a commitment on the part of the vendor.
Portions of this software are copyrighted by Intel Corporation.
© 1992 - 1999 SMART Technologies Inc. Printed in Canada 5/99
All rights reserved.