Using The System Event Log To Track Events; System Event Log Screen; Origin Tags; Event Log Messages - ADC HIGAIN HDSL2 Manual

152-231-116-01, Revision 01
U S
SING THE YSTEM
The System Event Log screen displays the 100 most recent events (most recent event displayed first) and provides
the following information:
•
Origin tags to identify the source of a Write entry (see
•
Date and time
•
Event log messages (see
To view a running log of system events, press
• Press N or P to page through the event log.
• Press T to return to the top of the log.
• Press L to clear the event log.
Monitor Performance
------------------------------------------------------------------------------
# Origin
1 Remote Unit
2 LU Craft Port
3 LU Craft Port
4 LU Craft Port
5 Line Unit
6 Remote Unit
7 Remote Unit
8 Remote Unit
9 LU Craft Port
10 LU Craft Port
11 LU Craft Port
12 Line Unit
13 LU Craft Port
14 - EMPTY -
15 - EMPTY -
Press: (N)ext Page, (P)revious Page, (T)op of Log, C(l)ear Log
ID: xxxx--xxxx--xxxx--xxxx
H2TU-C-231 List 1F
E L
VENT OG TO
"Event Log Messages" on page
E to select the Event Log.
Event Log Config
System Event Log (Page 1 of 7)
Date and Time
09/20/2000 14:35:02
09/20/2000 14:34:51
09/20/2000 12:11:22
09/20/2000 12:11:16
09/20/2000 12:10:49
09/20/2000 12:10:10
09/20/2000 12:10:08
09/20/2000 12:09:54
09/20/2000 12:08:49
09/20/2000 12:08:25
09/20/2000 12:08:21
09/20/2000 12:08:02
09/20/2000 12:08:01
09/20/2000 14:35:13
Figure 26. System Event Log Screen
October 2, 2000
Monitoring System Activity and Performance
T E
RACK VENTS
"Origin Tags" on page
43)
Inventory Rlogon Help
Entry
DS1 LOS Alarm: End
NLOC: Loop-down
Time set to 14:34:00
Date set to 06/06/00
DS1 LOS Alarm: End
DS1 AIS Alarm: End
DS1 LOS Alarm: Begin
DS1 AIS Alarm: Begin
NLOC: Loop-up
DS1 change: from B8ZS to AUTO
LBTO change: from 24
DS1 LOS Alarm: Begin
Event Log Reset
H2TU-C System:
42)
hr to NONE
OK___
41