ADC PG-FlexPlus FLL-814 Manual page 78

SCP-FLL814-012-04H
CONFIG — System Options (Continued)
Step
3 The following actions can be taken:
a. To change the Subscriber Test Response Mode value, press
or press or
↓
b. To change the RTLU Auto Logout value, press
to move to the next option.
↑
c. To change the PG-FlexPlus System ID, type in a System ID, or press
d. To change the Allow System Provisioning From RTLU value, press
value, or press
e. To change the RT Sealing Current value, press
to move to the next option. This option is displayed only on a locally powered system.
↑
f. To save the shelf options, select the ACCEPT SYSTEM OPTION CHANGES button, then press
From the SHELF OPTIONS WILL BE CHANGED. CONTINUE (Y/N)? prompt, the following actions
can be taken:
• To save the shelf options, press
– all current values are set to desired values
• To retain the existing shelf options on the Shelf Options screen, press
4
Press . The Main Menu screen reappears.
ESC
66
to move to the next option.
↑
or to move to the next option.
↓ ↑
. The following events occur:
Y
Action
SPACEBAR
to toggle to the desired value, or press
SPACEBAR
↓
SPACEBAR
to toggle to the desired value, or press
SPACEBAR
April 22, 2003
to toggle to the desired value,
or to move to the next option.
↑
to toggle to the desired
ENTER
.
N
ADC Telecommunications, Inc.
or
↓
or
↓
.