ADC PG-PLUS PLL-720 Technical Practice page 53

SCP-PLL720-020-03H
e. To change the value of the COLU alarm Unavailable Seconds (UAS 24 Hr), select the field in the
column, and press the
TYPE
f. To change the value of the COLU alarm Low Margin (MAR), select the field in the
press the
SPACEBAR
g. To change the value of the COLU alarm Power Feed Open (PFO), select the field in the
column, press the
option.
h. To change the value of the COLU alarm Power Feed Short (PFS), select the field in the
column, press the
option.
i. To change the value of the COLU alarm Power Feed Ground Fault (PGF), select the field in the
column, press the
TYPE
next option.
j. To change the value of the RT alarm Loss of Sync Word, select the field in the
the
SPACEBAR
k. To change the value of the RT alarm Errored Seconds (ES 15 Min), select the field in the
column, and press the
l. To change the value of the RT alarm Unavailable Seconds (UAS 24 Hr), select the field in the
column, press the
option
m. To change the value of the RT alarm Unavailable Seconds (UAS 15 Min), select the field in the
column, and press the
n. To change the value of the RT alarm Errored Seconds (ES 24 Hr), select the field in the
and press the
SPACEBAR
o. To change the value of the RT alarm Low Margin (MAR), select the field in the
the
SPACEBAR
p. To accept the changes, select the
the HDSL ALARM TYPES WILL BE CHANGED. CONTINUE(Y/N)? prompt, you have the following
options:
PLL-720, PLL-721 List 2's
to toggle to the desired value.
SPACEBAR
to toggle to the desired value, or press a directional key to move to the next option.
to toggle to the desired value, or press a directional key to move to the next
SPACEBAR
to toggle to the desired value, or press a directional key to move to the next
SPACEBAR
to toggle to the desired value, or press a directional key to move to the
SPACEBAR
to toggle to the desired value.
to toggle to the desired value.
SPACEBAR
to toggle to the desired value, or press a directional key to move to the next
SPACEBAR
to toggle to the desired value.
SPACEBAR
to toggle to the desired value.
to toggle to the desired value, or press a directional key to move to the next option
ACCEPT HDSL ALARM TYPE CHANGES
January 6, 2003
Configuration Submenu
COLU
column,
COLU TYPE
COLU TYPE
COLU TYPE
COLU
column, and press
RT TYPE
RT TYPE
RT TYPE
RT TYPE
column,
RT TYPE
column, press
RT TYPE
button, and press . At
ENTER
43