SCP-PLL720-020-03H
System Alarm Types Screen
Allows the provisioning of the alarm types of all system alarms.
default settings. You can view the results of these settings from the
1.
At the CONFIG submenu, select System Alarm Types, and press
2.
You can perform the following tasks:
a. To change the
desired value, or use a directional key to move to the next option.
b. To change the No RT S/W value, select the field, and press
use a directional key to move to the next option.
c. To change the EEPROM Failure value, select the field, and press
or use a directional key to move to the next option.
PLL-720, PLL-721 List 2's
value, select the field, and press the
COLU-RT MISMATCH
January 6, 2003
Table 9
shows the System Alarm fields and their
"Main Summary Screen" on page
to view the screen.
ENTER
SPACEBAR
to toggle to the desired value, or
SPACEBAR
to toggle to the desired value,
SPACEBAR
Configuration Submenu
18.
to toggle to the
37