Start-Up And Use - Caple PI3050 Instruction Manual

Practical advice for appliance use.
• Use cooking vessels made from material that
is compatible with the induction principle
(ferromagnetic material). It is recommended
the use of cast iron, enameled steel or special
induction inox pots. To assure the compatibility of
a vessel it is sufficient to check with a magnet.
SUITABLE MATERIAL
Cast iron, enamelled
steel, special inox
Key lock
Holding the key lock sensor down turns the key lock function on or off. If the pilot light associated with the
key lock sensor is on, the keypad is locked.
The locking function can be activated when the cooking levels are activated or when the cook top is off. If
the cook top is on, the key lock function locks all the sensors except the general on/off sensor and the key
lock.
When the cook top is off, the key lock function locks all the sensors, including the general on/off, except
the key lock.
The key lock is always taken from the control device is switched.
START UP AND USE
UNSUITABLE
MATERIAL
Copper, aluminium,
g l a s s , Te r r a c o t t a ,
ceramics,not magnetic
inox
To obtain the best performance from your hob:
• Use flat bottom pots with elevated thickness, to
be sure that these perfectly adhere to the heating
areas.
• Use pots with a diameter big enough to cover
the heating area completely, as to guarantee the
exploitation of all available heat.
• Avoid using the same pots used on the gas
burners: the gas burners heat concentration
could deform the pot bottom which lost adhesion.
22 22