Table Of Contents - Directechs DB3 Installation Manual

Contents
Introduction
Vehicle function compatibilities
Pre-installation and application warnings
OEM remote starter information
Wiring diagram
Locating components in the vehicle
Vehicle connections
Module programming
IMPORTANT!Before programming your module, you must first check if your vehicle is equipped with an OEM remote
starter and disable it. If the vehicle is equipped with an OEM remote starter, whether Active or Inactive, it must be
temporarily disabled or permanently disconnected depending on the vehicle. Please refer to the "OEM remote starter
information" section of the guide for additional details.Note:In some cases, the module will program to the vehicle even
if equipped with an OEM starter, but will prevent the aftermarket remote start from functioning properly.
Module programming for convenience only (skip transponder)
Connecting the module
LED diagnostics and troubleshooting
Soft reset
Hard reset
Feature programming
Feature and option list
Limited one year consumer warranty
Quick Reference Guide (customer copy)
3
4
5
6
7
8
9
11
10
12
12
14
16
16
17
18
19
20