Menus And Functions; General Functions; Switching On; Switching Off - Cleco CellCore Manual

3

Menus and Functions

3.1

General functions

3.1.1

Switching on

To switch on the tool, press the Start switch.
3.1.2

Switching off

There are several ways to switch off the tool.
Option 1:
Remove the battery.
→ Tool switches off after 20 seconds.
Option 2:
1. Navigate to Switching the tool off:
2. Press the
→ The
→ After five seconds, the tool switches off.
Option 3:
The tool will switch off if it is not used for a certain time. See Setting the shut-off properties, Seite 28.
3.1.3

Selecting a button

When talking about pressing a button in this manual, this means the following:
1. Use the arrow buttons to navigate to the desired button (outlined in blue).
2. Press the
3.1.4

Changing parameters

1. Press the
2. Change the number using the arrow buttons.
3. Confirm with the
Apex Tool Group GmbH
>
button.
symbol is displayed on the LCD.
button.
button.
button.
P2398PM | 2018-12
>
3
Menus and Functions
EN
9