Table of Contents
Advertisement
Repackaging instructions
Image 6–6
7.
Lock the tilt mechanism by inserting the tilt lock pin in the lock hole at the back of the display.
Caution:
Make sure that the tilt lock pin is inserted deep enough until only the red part of the pin is
visible.
Image 6–7
8.
Place the display in the bottom box so that it fits in the buffers.
Caution:
It takes 2 persons to safely execute this action.
48
K5902079 /11
Coronis Uniti
Image 6–8
Advertisement
Table of Contents
