Loading And Playing A Cd; Cd Mode Operations - Clarion compact disc Owner's Manual

CD Mode Operations

Note:
• CD-ROM discs cannot be played.

Loading and playing a CD

When a CD is already inserted (When the DISC
*
indicator lights), press the FUNC button
8
and select CD mode. Playback starts automatically.
1) Press the CD button
turns downward and the CD Insertion slot
appears.
Note:
• When the operation panel angle has been adjust-
ed with the SLOPE button
when it has been adjusted to the maximum
angle), a CD cannot be inserted because the
panel may damage it. Press the CD button
press and hold the SLOPE button
panel to the maximum angle and insert the CD.
For 5-inch (12 cm) CD
2) Insert the disc into the CD Insertion slot
with the label side facing up.
CD mode is set and playback begins auto-
matically.
After a CD is inserted, the operation panel
*
closes automatically. Adjust the panel angle
with the SLOPE button
panel angle has been stored, it is set to that
position automatically.
If the operation panel is turned downward after
*
ejecting a cassette tape or due to other opera-
tion, an alarm sounds, the operation panel
closes, and the CD playback begins automati-
cally.
CAUTION
Do not put your hand or fingers into the
Cassette Insertion slot or CD Insertion slot,
as this may cause a breakdown.
Be careful not to let your fingers get caught
in the panel when it turns upward or down-
ward.
12
. The operation panel
3
31
2 (excluding the case
3 or
to set the
2
For 3-inch (8 cm) single CD
31
. When an operation
2
3) Slide the Up/Down button
(left) to select a track.
: Selects the next track. (Example: The
third track from the current one is select-
ed by sliding the button 3 times.)
To return to the beginning of the current
track, slide the Up/Down button
to (left).
: Selects the previous track. (Example:
The third track before the current one is
selected by sliding the button 1+3=4
times (the first sliding returns you to the
beginning of the current track).)
Ejecting the CD
1) Press the CD button
2) Remove the CD.
Remove the CD only when the operation
panel is turned downward. The panel closes
automatically after a few seconds.
When the operation panel angle has been
*
stored, it is set to that position.
Notes:
• Do not leave a disc in the ejected position. If the
unit is operated in such a condition, it may break
down or damage the disc.
• When inserting a disc, insert it until it is fully drawn
into the slot.
• When the operation panel is left in downward
position, a repeated beep sounds. Remove or fully
insert the CD or a tape and close the operation
panel.
• Be careful not to let your fingers get caught in the
panel when it turns upward or downward.
• When the CD button
3
ation is performed even if a disc has not been
loaded. During the eject operation, the SLOPE
button and the TAPE button
2
operated.
• If the operation panel is moved due to shock when
set to the maximum angle, it must be reset to the
maximum angle with the SLOPE button
the CD can be ejected by pressing the CD button
.
3
to (right) or
11
once
11
to eject the CD.
3
is pressed, the eject oper-
cannot be
1
before
2
21