Owner’s manual Mode d’emploi Manual de instrucciones AM/FM CD PLAYER WITH DVD/CD/MD CHANGER CONTROL • RADIO AM/FM-LECTEUR CD AVEC COMMANDE DE CHANGEUR DVD/CD/MD • RADIO-REPRODUCTOR AM/FM DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DVD/DISCOS COMPACTOS/ MINIDISCOS...
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO.,LTD. 50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN MANUFACTURED: Clarion Co.,Ltd. SERIAL No. MADE IN...
CD player or it may damage the CD player. Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante. Cerciórese de desplegar y de leer la página siguiente. DXZ535...
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. DXZ535...
For the DVD • When the button is pressed and held, changer, refer to the Owner’s Manual pro- switches the user titles or track titles, etc. vided with the DVD changer. while in the CD changer mode. DXZ535...
Page 7
• Switch the band. It’s radio like you’ve never heard before. • When the button is pressed and held, switch So Get Sirius and Listen Up! For more infor- seek tuning or manual mode. mation, visit siriusradio.com. DXZ535...
: SIRIUS indication : MAGNA BASS EXTEND indication : Category indication LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. DXZ535...
Be careful not to damage it by press- ing on it with fingernails, screwdrivers, etc. Note: 4. Close the HOLD FLAP. • If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. HOLD FLAP DXZ535...
Take note of the following points: Rear cover • When replacing batteries, replace both batteries with new ones. • Do not short-circuit, disassemble or heat batteries. Rear side • Do not dispose of batteries into fire or flames. • Dispose of spent batteries properly. DXZ535...
No function. Random play. and VTR. When pressed and held for 1 second: Disc random play. ∗ Some of the corresponding buttons on the main unit and remote control unit have different functions. ∗ [DUAL ZONE] button is not available. DXZ535...
Select the one you prefer. ∗ External equipment not connected with ∗ The factory default setting is “Z+ OFF”. CeNET is not displayed. Each time you press the [Z+] button, the tone ef- fect changes in the following order: DXZ535...
3. When the adjustment is complete, press the 4. Press the [d] or [a] button to select “B<Q 1>”. [A-M] button several times until the function Turninng the [ROTARY] knob clockwise or mode is reached. counterclockwise to select the Q-curve. DXZ535...
(FM or AM). decreases. ∗ If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available. DXZ535...
1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. DXZ535...
GTrack-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track. DXZ535...
Page 17
1. Press the [SCN] button to start scan play. “SCN” lights in the display. 2. To cancel the scan play, press the [SCN] but- ton again. “SCN” goes off from the display and the current track continues to play. DXZ535...
Setting the clock mode. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “CLOCK”. 3. Press the [ ] button. DXZ535...
Page 19
∗ The factory default setting is “CLR SCAN”. ∗ The following illustration presents one of the ∗ During change the color’s name not appear. patterns which are shown when the screen ∗ After 3 second the color change to the other. saver function is turned on. DXZ535...
∗ This function is not compatible with all cellular Mode Number of titles telepones Contact your local authorized Clarion dealer for information on proper installation and CD mode 50 titles compatibility.
2. Each time you press and hold the [D] button for 1 second or longer, the title display changes in the following order: User title (disc) ➜ CD-tect title (disc) ➜ Artist title ➜ CD-text title (track) ➜ User title (disc)… DXZ535...
1. Press and hold the [SCN] button for 1 sec- go off from the display and normal play re- ond or longer. “DISC” and “SCN” light in the sumes from the current track. display and disc scan play starts. DXZ535...
2 seconds or longer to store the current sta- cally seek a station. Press the [d] button to tion into preset memory. automatically tune up the frequency band to the next available TV station; press the [a] button to automatically tune down. DXZ535...
Page 24
2. Press the [a] or [d] button to select “TV AREA”. 3. Press the [ ] button. 4. Turn the [ROTARY] knob clockwise or coun- terclockwise to select the reception area. 5. Press the [ ] button. 6. Press the [T] button to return to the previous mode. DXZ535...
Replace with a compact disc with no scratches. scratched or warped. Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on. after power is turned the internal lens when the car is parked in a humid place. DXZ535...
An MD inside the MD changer cannot be Eject the disc then reload it properly. played because it is loaded upside-down. Displayed when a non-recorded MD is Load a pre-recorded MD in the MD loaded in the MD changer. changer. DXZ535...
Page 27
Region code error Eject the disc and replace correct region code disc. If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. DXZ535...