Interpolation Function - Mitsubishi Electric KD Series User Manual

2-5 Interpolation function

【 Conceptual Diagram of Interpolation 】
Missing pixel
303 304 1 2
Interpolation: ON
【Interpolation example】
TM-XG537C
・・・
3 4 304
・・・
・・・
Interporation:ON
COPYRIGHT © 2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
【 Interpolation function 】
This product has a Sensor IC array having a reduction of a
resolution because of the Sensor ICs gap. This is a
function to compensate a reduction of the resolution
between neighboring Sensor ICs.
【 Technology of Interpolation 】
To get the most expected Interpolation data, the gaps
between neighboring Sensor ICs are designated to be
300dpi and precisely controlled by the tolerance of ± 15μm
in X/Y direction.
Interpolation process will create the missing pixel data
from the neighboring pixels, and emulates the data output
as if the 600 dpi is fully realized for the whole width.
"One dimensional filter interpolation" is used which utilizes
each 5 pixels in right and left.
30