Electric Equipment Specification; Electrical Paramters; Weight And Dimensions; Channel Characteristics - Jolly A-5 Spot User Manual

Table of Contents

Advertisement

LED
Turn off the LED first to better protect the device when the fixture is turned off. Turn off the power after
running for at least 5 minutes
Don't touch the bulb with your hands.Once contacting with your hands,scrub with alcohol and then dry
with linen.
When the light is on, the bulb runs at high pressure,so there is a risk of broken.It is related to the duration
of using,temperature and unreasonable operation.Therefore, please do not use lamp over the life span.
The using of LED should not exceed
time of the fixure regularly.When the LED is used around 30000 hours, We strongly recommend that you
change the lamp.After replacing it,the used time of LED can be removed and reset.
Avoid operating in dirty and dusty environment, clean and maintain lamps regularly. Wipe the outside of
the lens at least every 20 days. Wipe the internal fan at least every 30 days
It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not
buildup on or within the fixture. Otherwise, the fixtures light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably
through out its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circum stances should alcohol or solvents be used!
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues,reduc-
ing the light-output very quickly.The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush,The interior of the fixture should be cleaned at least annua-
lly usinga vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the LED and the fuse.
Please disconnect the power supply before replacing the fuse and bulb. When replacing them, adopt the
same mode.

10.1 Electrical paramters

SOURCE:
400W White LED
POWER:
500W
VOLTAGE:
AC100-240V 50/60HZ
Color temperature:8000K
Life time for LEDs over 20000 hours

10.2 Weight and dimensions

Dimensions:514X4
NET WEIGHT:28Kg
Dimensions(Carton package):521X506X816mm

10.3 Channel Characteristics

1.Ch annel:23、18 DMX -512.
2. Sc an: Pa n540°,Tilt270°,Sc an speed adjustable.Fi xture could auto reset.
3.Co lour wh eel: one open+8colors.half-color effects.
4.Go bo wh eel:one open+7 gobos. Fi x gobo wh eel :one open+8gobos.
5 . Pr ism system:1 rotating of faces.
30000
hours, otherwise it can damage device. Check the running

10.Electric equipment specification

17
X551
mm
- 15 -

Advertisement

Table of Contents
loading

Table of Contents