Jolly A-5 Spot User Manual page 14

*Click on the main menu of the icon and value to view set of the relevant lighting information. If there is
symbol of the " " on the display, it indicates that the device may be wrong , if the symbol was blue, the
contents are errors appeared, click to clear. When the symbol is yellow, you can click on the view and
according to the references information to modify, If there is any doubt, please consult the relevant
technical personnel. (-for details see attached table).
CODE # ERRO INFO
E001 SpiFlashError
E002 BD1Init Error
E003 BD2Init Error
E004 BD3Init Error
E005 BD4Init Error
E006 BusErr1
E007 SPDError
E008 BD1 BUS Error
E009 BD2 BUS Error
E010 BD3 BUS Error
E011 BD4 BUS Error
E012 Pan FB. Err
E014 Tilt FB. Err
E013 Pan Zero Err
E015 Tilt Zero Err
E016 Prism Err1
E017 Focus Err
E018 Zomm Err
E019 R.Gobo Err
E020 Gobo RTErr
E021 ColourW1 Err
E022 ColourW2 Err
E023 St.Gobo Err
E028 Effect Err
E024 BFan Error
E025 LED Fan1 Error
E026 LED Fan2 Error
E027 ArtNet Mdl Err
CHECK MEASURMENT
Check the welding of memory IC
Check the communication signal 485& 485 chip &
memory IC
Check main cable ABAB（485） chip
Check the welding of master IC
Check the communication signal& welding of
communication chip
Check the light coupling line, optical coupling
switch and a plate of the relative position
measurement
Check cable of sensor, distance and location of
,magnets and sensor
Check the fan of Bottom
Check the fan of Head LED
Check the fan of ArtNet、communication signal
- 10 -
NOTE
RESET
ERROR