Advertisement
Bella Get Ready Vanity
Pre-Assembly:
•
Please read all instructions before beginning assembly.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Parts Included:
A - Top – 1 pc
Hardware Enclosed:
D - Cord Set – 1 pcs
Tool Required:
Phillip Head Screwdriver (Not included)
Assembly Instructions:
1 . Lay the Top (A) upside down on a carpet or the foam in shipping box. Use caution when turning table over
as the center flip panel comes with a mirror.
2. Attach four Legs (B) by inserting the hangers bolt into the inserted nuts at corners of the Top (A). Turn
clockwise to tighten.
B
B
B - Leg – 4 pcs
E - Wood Screw – 2 pcs
(4 x 15 mm)
B
B
A
www.pbteen.com
C - Removable Tray – 1 pcs
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PB TEEN Bella Get Ready Vanity
Summary of Contents for PB TEEN Bella Get Ready Vanity
- Page 1 Bella Get Ready Vanity Pre-Assembly: • Please read all instructions before beginning assembly. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Parts Included: C - Removable Tray – 1 pcs A - Top – 1 pc B - Leg –...
- Page 2 3. Carefully turn the vanity right side up. Flip up the center panel. Place the Cord Set (D) into the cut out near back of Top (A). Secure with Wood Screws (E) by a Phillip Head Screwdriver. 4. Insert the Removable Tray (C) onto the open space of Top (A). 5.
Need help?
Do you have a question about the Bella Get Ready Vanity and is the answer not in the manual?
Questions and answers