Advertisement
Beadboard Smart Corner Desk
PRE-ASSEMBLY:
•
Please read all instructions before beginning assembly.
•
Two-person assembly is recommended.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
HARDWARE INCLUDED:
A - (4) Wooden knob bolts
(5/32" x 28)
E- (8) Spring washer
(1/4" x 11 x 2mm)
I – (1) Allen Key
(4mm x 74 x 29)
B – (4) Wooden knobs
C – (1) Wooden knob with
F – (8) Flat washers
G – (8) Semi-circle brackets
(1/4" x 16 x 2)
J – (1) Wrench (10 x 89 x 1.5mm)
www.pbteen.com
hardware attached
(5/16" x 31 x 8)
D – (4) Long bolts
(1/4" x 2-1/2" x 12)
H – (8) Nuts
(1/4" x 10 x 5mm)
Advertisement
Table of Contents
Related Manuals for PB TEEN Beadboard Smart Corner Desk
Summary of Contents for PB TEEN Beadboard Smart Corner Desk
- Page 1 Beadboard Smart Corner Desk PRE-ASSEMBLY: • Please read all instructions before beginning assembly. • Two-person assembly is recommended. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. HARDWARE INCLUDED: A - (4) Wooden knob bolts B –...
- Page 2 PARTS INCLUDED: K – (2) Desk Pedestal L – (1) Desk Top (center part) M – (2) Desk Top (side parts) N – (1) Supporting leg TOOLS REQUIRED (but not included): • Phillip Screwdriver ASSEMBLY: 1. Gently screw the Wooden Knob with hardware attached (C) into movable board. 2.
- Page 3 8. Put the Pedestals (K) in the position as shown. Two people turn the connected top right side up and lift to the desired height. Make sure the two Pedestals (K) align with the positioning frames underneath the top and slowly lower the top down until it sits firmly on the Pedestals (K). Adjust the recessed levelers underneath the Supporting Leg (N) and Pedestal legs to make sure the whole assembly is balanced.
Need help?
Do you have a question about the Beadboard Smart Corner Desk and is the answer not in the manual?
Questions and answers