Advertisement
Quick Links
Beadboard Bedside Table
Pre-assembly:
• Please read all instructions before starting to assemble.
• Two-person is recommended during assembly.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Parts Included:
A – Top – 1 pc
Hardware Included:
D – Allen Key – 1 pc
Tool Required:
Phillips Head Screwdriver ( not included)
Instructions:
1. Put Top (A) on a soft, scratch-free surface, such as a carpet or rub. Slowly pull out the drawer as
shown below.
B – Frame Leg – 2 pcs
E – Hex Bolt – 8 pcs
1 of 3
www.pbteen.com
C – Shelf – 2 pcs
F – Phillip Head Screw – 8 pcs
Advertisement
Related Manuals for PB TEEN Beadboard Bedside Table
Summary of Contents for PB TEEN Beadboard Bedside Table
- Page 1 Beadboard Bedside Table Pre-assembly: • Please read all instructions before starting to assemble. • Two-person is recommended during assembly. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Parts Included: A – Top – 1 pc B –...
- Page 2 2. Sit Top (A) on its back, align pre-drilled holes in Frame Leg (B) with exposed wooden dowels on side panel of Top (A); Insert Hex Bolt (E) through pre-drilled holes in drawer box frame into pre- drilled holes in Frame Leg (B) as shown below, loosely tighten with Allen Key (D). Repeat for rest 3 Hex Bolts (E).
- Page 3 5. Stand up this assembled Bedside Table. Re-insert the drawers. 6. Adjust the recessed levelers underneath the legs to make sure the whole assembling balance. 7. Hardware should be checked periodically for tightness. Care Instructions: • Avoid direct sunlight and excessive temperatures. •...