Advertisement
Beadboard Simple Trundle
Pre-assembly:
•
Please read all instructions before starting to assemble.
•
Two-person is recommended during assembly..
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Parts Inclduded:
A – Long Front Siderail – 1 pc
(with decoration face)
B – Long Back Siderail – 1 pc
C – Short Siderail – 2 pcs
D – Side Bottom Board – 2 pcs
(with protruding edge)
E – Middle Bottom Board – 1 pc
(with sunken edge)
F – Wooden Bottom Board Support – 2 pcs
(with protruding edge)
Hardware Included:
G – Allen Key – 1 pc
J – Large Screw – 12 pcs
H – Hex Bolt – 8 pcs
K – Small Screw – 10 pcs
1 of 3
www.pbteen.com
I – Barrel Nut – 8 pcs
L – Pan Head Screw – 24 pcs
Advertisement
Table of Contents
Related Manuals for PB TEEN Beadboard Simple Trundle
Summary of Contents for PB TEEN Beadboard Simple Trundle
- Page 1 Beadboard Simple Trundle Pre-assembly: • Please read all instructions before starting to assemble. • Two-person is recommended during assembly.. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Parts Inclduded: A – Long Front Siderail – 1 pc (with decoration face) B –...
- Page 2 M – Castor – 6 pcs Tool Required: Phillips head screwdriver ( not included) Instruction: 1. Slide Middle Bottom Board (E) into Side Bottom Boards (D) by fitting the protruding edge of the Side Bottom Board (D) into the sunken edge of the Middle Bottom Board (E). Make sure the faces with pre-drilled holes for wooden dowels on the Side Bottom Boards (D) is facing up before assembly, as shown below.
- Page 3 5. Turn the assembled unit upside down. Insert Small Screws (K) into pre-drilled countersink holes in inner rails of the Long Siderails (A&B) and the Short Siderails (C), as shown below. Tighten all Small Screws (K) with a Philips head screwdriver. 6.
Need help?
Do you have a question about the Beadboard Simple Trundle and is the answer not in the manual?
Questions and answers