Video Cover Settings (Privacy Zone); Motion - urmet domus 1098 User Manual

VIDEO COVER SETTINGS (PRIVACY ZONE)

This menu allows you to create privacy zones if you want to partially cover some certain part of the image. You can create
up to four privacy zones in any size and location on the camera image. Enable the Privacy Zone, and select how many
zones you need. The zones appear as "red box". Click on the edge of the red box and drag it to position and or size it and
create a privacy zone.
Note: The area of privacy zones you had set will be invisible in both live view & recording video.

MOTION

This menu allows you to configure motion detection parameters. When a movement is detected by one or more cameras,
the NVR will alert you to a potential threat at your home. It does this by sending you an email alert with an attached image
from the camera to use as a reference (if this option is enabled) and/or sending push notifications via the mobile app.
Setup: Click on the icon
Switch: Enable or disable motion detection.
•
Sensitivity: Set the sensitivity level. Level 1 is the lowest sensitivity level and level 8 is the highest sensitivity level.
•
DS1098-028A
on the configuration page.
Motion Detection Area:
The whole screen is marked for motion detection (red
blocks) as default. If you want to disable the motion
detection on a certain area, click on the grid cursor and
then drag the mouse to highlight the scope to deselect
the area into transparent blocks. After setting is
completed, right-click to go back and click on Save to
make the area setup effective.
49