Getting Started - Interphase Proble Operation Manual

Forward scanning sonar
Table of Contents

Advertisement

Display Unit
12 VDC
Display
Power
Mounting
Cable
Bracket
Transom Mounted Transducer
or
Thru-Hull Transducer

Getting Started

Check to see that all the components shown at left were
included with your Probe. If a part is missing, contact the
Interphase Customer Service Department (831) 477-4944
immediately.
WARNING: DO NOT operate the Probe with parts missing
or with parts other than those obtained through Interphase;
doing so could cause a malfunction in the unit. Any
malfunctions to the Probe resulting from unauthorized parts
are not covered by warranty.
Turning the Probe On
To turn the Probe on, press the Power/ Backlight Key located
on the lower right corner of the unit one time. The unit should
sound a beep and the display should be illuminated.
Mounting
Knobs
The Control Center
From the Contol Center the Contrast can be adjusted by
turning the Control Knob cockwise to darken, counter
clockwise to lighten. Seven of the most popular displays have
been pre-programmed into the Probe's memory and can be
instantly selected from the Control Center Menu. In the
following sections, these different displays are called "Views".
They include:
Full Screen Forward View
Full Screen Track Plot View
Full Screen Chart (Conventional) View
Full Screen Set-Up View
Split Screen Data View with Large Digits on left and
Forward looking display on right.
Split Screen View with Chart (Conventional) display on
left and Forward looking display on right.
Split Screen View with Chart (Conventional) display on
left and Track Plot display on right.
Each of these views can be easily selected by pressing the
button below the desired menu selection. Where two
selections are possible, press the button again until you see
your desired view. When first turned on, the Probe's internal
memory automatically sets the starting view to the last one you
used before turning off the power.
The flow chart diagram on the facing page shows how to easily
navigate between the Probe's instant Views.
22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probe

Table of Contents