Advertisement
4.2 Main Function Chart
5. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By DMX controller
5.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in Automatic,sound activated mode . Its
DMX input jack will have nothing plugged into it. The other units will have to select A001 ,
Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave led lights will
constantly on.
5-
Advertisement
