Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hybrid HSS CW
Summary of Contents for Hybrid HSS CW
- Page 1 User Manual Please read the instructions carefully before use...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to set up the unit 5. How to control the fixture 6. DMX512 Configuration 7. DMX512 Connections 8. Troubleshooting 9. Fixture Cleaning... -
Page 3: Safety Instructions
1. Safety Instructions Please read the instructions carefully which include important information about the installation, operation and maintenance. WARNING Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet. Unpack and check carefully that there is no transportation damage before using the ... -
Page 4: Technical Specifications
2. Technical Specifications Light Sources: 1x 200W Warm White+ Cool White 2in1 COB Led Channel: 5 DMX channel Control Mode: Auto, Sound Active, Master/Slave, DMX 7 built-in performance mode Electronic Dimming:0-100% Fuse：F3A/250V Power consumption：200W ... -
Page 5: How To Set Up The Unit
4. How To Set Up The Unit 4.1 Control Panel Button: MENU To go forward select menu or go back to the last level menu ② UP To go forward select menu or increase parameters ③ DOWN To go backward select menu or reduce parameters ④... -
Page 6: How To Control The Fixture
signal was disconnect , the program will return to the original mode. 4.2 Main Function 5. How to control the fixture There are three ways to control the fixture A. Universal DMX controller B. Master/Slave operation C. Controller A. Universal DMX controller The fixture can be set to the DMX address remotely by the universal DMX controller. -
Page 7: Dmx512 Configuration
Master/Slave mode, the first fixture will control the others to give an automatic, sound activated, synchronized light show. This function is good when you want an instant show. The first fixture’s DMX input cable will have nothing to connect it, and the other fixtures will be set in slave mode automatically. -
Page 8: Dmx512 Connections
7. DMX512 Connections The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. 1. If you are using a controller with a 5 pin DMX output, you need to use a 5 to 3 pin adapter-cable. 2. -
Page 9: Troubleshooting
8. Troubleshooting The following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The fixture does not work, It has no light 1. Check the connection of power and main fuse. 2.